manualshive.com logo in svg

Viavi T-BERD MTS 5800, Getting Started Manual

Share
Download
Viavi T-BERD MTS 5800 Getting Started Manual Download Page 201

Appendix A  

Specifications

MSAM specifications

 

T-BERD/MTS/SC Getting Started Guide

March 2018

22046537, Rev. 016

Page 177

Optional expansion module specifications

Specifications for optional expansion modules are provided in the user manuals and 
data sheets that support the modules.

OTDR Modules

For OTDR Module specifications, refer to the 

T-BERD / MTS 2000 / 4000 OTDR User 

Manual

. Supporting data sheets are available at 

www.viavisolutions.com

.

TEM Module

For TEM Module specifications, refer to the 

T-BERD / MTS 5800 GNSS and Timing 

Expansion Module User Manual

. Supporting data sheets are available at 

www.viaviso-

lutions.com

.

Internal GNSS application for T-BERD / MTS 5800-100G and 5882

T-BERD / MTS 5800-100G and 5882 support an internal GNSS that can be used when 
the TEM module is not available. For more information refer to the 

T-BERD / MTS 5800 

GNSS and Timing Expansion Module User Manual

. 

MSAM specifications

Refer to the following sections for specifications for the MSAM and each of the available 
PIMs:

•

“Physical specifications” on page 178

•

“Power supply specifications” on page 178

•

“Battery specifications” on page 178

•

“HS Datacom PIM specifications” on page 178

•

“Diphase PIM specifications” on page 198

•

“DS1 PIM specifications” on page 199

•

“E1 (BNC) PIM specifications” on page 201

•

“E1 (RJ-48) PIM specifications” on page 202

•

“E3/DS3/STS-1 PIM specifications” on page 204

•

“E4/STM-1e PIM specifications” on page 207

•

“Interface Specifications- Jitter and Wander applications” on page 210

•

“SFP PIM specifications” on page 210

•

“XFP PIM specifications” on page 211

NOTE:

These specifications are not applicable to Smart Class 4800/4800P.

Summary of Contents for T-BERD MTS 5800









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands