Viavi SPA06MA, User Manual, Page: 143 / 412

Chapter 5 Using LTE/LTE-A FDD Analyzer
Conducting OTA measurement
SPA06MA-O User’s Guide
April 2021 22145360, R005 Page 127
Viewing the logging data
To view the logging data
1 Load the saved logging file using the Load ( ) icon on the side bar. Make sure
the file extension is.gomv.
2 Tap to switch Plot Item to RSRP , RSRQ , RS-SINR , S-SS RSSI , P-SS Power , S-
SS Power , S-SS Ec/Io or SNR .
3 Tap the Apply button.
The point color of the map changes to the corresponding value, and if there is no
detected LTE signal, the point will become gray color.
Importing cellsite DB
You can import the site DB by creating the 5G site information form.
To import cellsite DB
1 Create the 5G site information with an excel file as below.
2 Input the two mandatory fields: Lat (DecDeg) and Long (DecDeg) .
3 Input the Azimuth field if you want to check the direction of antenna.
4 Make sure to save the file as (Comma delimited) (*.csv).
5 Copy the file to the USB memory stick and insert it to the USB A or USB B port of
the instrument.
6 Tap the Load ( ) icon on the side bar.
7 Import the saved file.
Once the file is loaded, the following cellsite information appears with an icon.
Figure 63 shows an example of an importing cellsite DB.
NOTE
When you load the result file, a pop-up message asking whether you want to
load data only or data with map
appears. If the current screen does not display all the loaded data, the screen
mode will be automatically changed to Full.