MPOLx-84/85 (P)
53
6 L
OSS
/L
ENGTH
T
EST
O
PERATION
R
EFERENCING
Fig. 13 One jumper cable reference method
Fig. 14 Three jumper cable reference method
3.
Establish proper cabling according to your settings.
If you have changed the referencing method:
If you have changed the referencing method you must reference
before you can start a measurement. In this case you can start
referencing from the measurement display.
J
In the
Loss/Length
measurement display tap the referencing
button (1).
To repeat referencing with the same referencing method:
In this case you start referencing from the menu.
1.
In the
Loss/Length
main menu press the
[
A
]
key and select
[
Set Reference
]
.
1
