Viavi SmartClass MPOLP-85 Operating Manual Download Page 23

Page: 23 / 115

MPOLx-84/85 (P)

3 G

ETTING

TARTED

NPACKING

THE

INSTRUMENT

To change the AC line plug adapter:

Squeeze both sides of the PS4 latch lock (see

Fig. 5

Push the AC line plug adapter upwards.

Slide a different AC line plug adapter into the slot (see

Fig. 6

PS4: Changing the AC line plug adapter

To operate the MPOLx-84/85 (P) with AC power:

Connect the PS4 DC power cord to the MPOLx-84/85 (P)

external power supply connector.

(The connector is under the cover on the right side.)

Plug the PS4 into the AC line socket.

The MPOLx-84/85 (P) switches on automatically when powered

by the PS4.

NOTE:

The PS4 provides power even if dry or rechargeable batteries are

inserted in the instrument.

The MPOLx-84/85 (P) cannot be powered via the USB interface.

Summary of Contents for SmartClass MPOLP-85




















































































































Search results

Summary of Contents for SmartClass MPOLP-85

Reviews:

Related manuals for SmartClass MPOLP-85

Brands by name

Popular brands

Viavi SmartClass MPOLP-85, Operating Manual

Search results

Summary of Contents for SmartClass MPOLP-85

Reviews:

Related manuals for SmartClass MPOLP-85

Brands by name

Popular brands