Viavi SmartClass Fiber OLS-85 Operating Manual Download Page 55

Page: 55 / 74

OLS-85/OLS-85P

AVING

RESULTS

8 D

ATA

ANAGEMENT

ATA

ANAGEMENT

NOTE:

Results are always stored under the currently selected (active)

project. Thus, to display stored results the desired project must

be set to active first (see “Managing projects” on page 36).

Saving results

Saving results is explained in the descriptions of each

application.

Data management of Probe and PCM tests

Recalling stored test results

Stored test results are displayed directly from the menu in the

Probe

PCM

application.

The

Probe

PCM

application is selected.

Press the

[

]

key.

Tap the

[

]

button.

Tap the

[

Measurement Data

]

button.

The list of stored test results is displayed.

To show all columns of the overview:

Press the right/left arrow keys to show additional information.

The displayed information depends on the selected

application.

Fiber ID

Test label name

Pass/Fail

Passed/failed label

Summary of Contents for SmartClass Fiber OLS-85











































































Search results

Summary of Contents for SmartClass Fiber OLS-85

Reviews:

Related manuals for SmartClass Fiber OLS-85

Brands by name

Popular brands

Viavi SmartClass Fiber OLS-85, Operating Manual

Search results

Summary of Contents for SmartClass Fiber OLS-85

Reviews:

Related manuals for SmartClass Fiber OLS-85

Brands by name

Popular brands