Viavi SmartClass Fiber OLS-85 Operating Manual Download Page 19

Page: 19 / 74

OLS-85/OLS-85P

NPACKING

THE

INSTRUMENT

3 G

ETTING

TARTED

NOTE:

Take care to insert the batteries correctly. The correct polarity is

indicated by a diagram inside the battery compartment.

– or –

Insert new or replace the RBP2 Li-Ion Battery Pack.

– or –

Switch from non-rechargeable batteries to rechargeable ones

by replacing the battery tray with a new battery pack (or vice

versa).

Close the battery compartment.

Press the

[

]

key to switch on.

Recharging the batteries

The rechargeable RBP2 Li-Ion Battery Pack is recharged when

the PS4 Universal AC/DC Power Supply is being used to power

the instrument. The instrument switches to trickle charging

automatically as soon as the RBP2 Li-Ion Battery Pack is fully

charged.

NOTE:

Rechargeable AA batteries will not be recharged in the

instrument. For AA-type rechargeable batteries please use an

external charger.

It is not possible to charge the rechargeable AA batteries or the

RBP2 Li-Ion Battery Pack via the USB interface.
The instrument is powered by the PS4 Universal AC/DC Power

Supply if the PS4 Universal AC/DC Power Supply and the USB

interface are both connected.

Deep discharge

A rechargeable battery that appears to be dead (unit will not

turn on even when connected to external power) may well be in

a deep discharge state. It can be fully charged with the following

charging cycle:

Plug in the power cord for 1–1.5 hours.

Battery should be partly charged now.

Switch the power on.

If the instrument starts: Let the battery fully charge.

– or –

If the instrument does not start:

Unplug power cord, plug it back in and repeat steps 1 and 2.

NOTE:

If the battery is completely deep-discharged, this cycle might

need to be repeated up to 3 times.

Summary of Contents for SmartClass Fiber OLS-85











































































Search results

Summary of Contents for SmartClass Fiber OLS-85

Reviews:

Related manuals for SmartClass Fiber OLS-85

Brands by name

Popular brands

Viavi SmartClass Fiber OLS-85, Operating Manual

Search results

Summary of Contents for SmartClass Fiber OLS-85

Reviews:

Related manuals for SmartClass Fiber OLS-85

Brands by name

Popular brands