Viavi SmartClass Fiber OLS-85 Operating Manual Download Page 18

Page: 18 / 74

OLS-85/OLS-85P

3 G

ETTING

TARTED

NPACKING

THE

INSTRUMENT

Battery operation

Replacing batteries

Fig. 5

Replacing the batteries

The battery compartment is on the back of the instrument.

Press down the latch to release and to open the lid of the

battery compartment.

Insert new batteries in the tray or remove the used batteries

from the tray and replace all eight with fresh ones.

WARNING

Dangers when handling batteries

Handling batteries may be dangerous. Please note the fol

lowing safety instructions.

Please note the battery operation safety information in the

chapter

“Battery operation” on page 11

Replacing batteries

Do not replace individual batteries. Always change all eight

batteries at the same time.

Always use eight batteries of the same type; i.e. do not mix

rechargeable and non-rechargeable batteries.

RBP2 Li-Ion Battery Pack

Latch lock

AA battery tray

Summary of Contents for SmartClass Fiber OLS-85











































































Search results

Summary of Contents for SmartClass Fiber OLS-85

Reviews:

Related manuals for SmartClass Fiber OLS-85

Brands by name

Popular brands

Viavi SmartClass Fiber OLS-85, Operating Manual

Search results

Summary of Contents for SmartClass Fiber OLS-85

Reviews:

Related manuals for SmartClass Fiber OLS-85

Brands by name

Popular brands