MANUAL VIAVAC-CB4 / 4.1 ( Operator section ) Art. nr. 50504 EN (01-07-2017)
__________________________________________________________________________________________
23
___________________________________________________________________________________
VIAVAC vacuum lifting BV T. + 31 348 449 660 E. [email protected] I. www.viavac.com
B 7.2 CB tilting beam
The tilting beam is an accessory which makes it possible to install
roof panels with an pith larger then 30
o
as well to install long
vertical wall panels.
The tilting beam can be mounted without the use of tools.
It slides over the mounting plate en locks itself by an integrated
spring loaded securing pin. Because of the weight tilting beam we
advise to do this with 2 persons.
__________________________________________________________________________________________
1
2
3
( 1 )
( 2 )
( 3 )
( 4 ) ( 5 )
( 5 )
__________________________________________________________________________________________
1.
To be able to mount the tilting beam the traverse under the device has to be tilted approx 45
o
Therefore it has to be unlocked by lifting the securing handle (1) as indicated. Consequently the
traverse can be rotated 45
o
.
2.
The tilting beam (4) has to be slided over the entire length of the mounting plate, to achieve this you
need to pull the securing pin simultaneously. When put in place the securing pin will lock the position of
the tilting beam
3.
Connect the vacuum hoses to the device.
Subsequently the extension beams and suction pads sets can be fitted along the tilting beam.
ITEM QUAN. DESCRIPTION
WEIGHT
kg
ART. NR
1
1
Tilting beam
25
408006
