Seite 7 von 22
3
Connections on the unit (rear panel)
Electrical voltage!
When working on electrical systems and equipment, there is a danger to life and fire!
Work on the KNX IR linker may only be carried out by an electrician.
Figure 2: Back of the unit
3.1
KNX Port
The connection to the KNX bus system is carried out via screw terminals of type
Weidmüller BL 5.08 / 02/180 SN OR BX. The screw clamp is included in the delivery.
The power consumption of the KNX connection is indicated in the data sheet.
4
Display of the front panel
Figure 3: Front of the unit
LEDs display various statuses for the user. These can be taken from the scale in chapter
8.2.
