Seite 15 von 22
6.2
IR signal triggers KNX command:
This is only possible with the scene module IR to KNX.
If a stored IR signal is detected, the Receive LED flashes and the KNX IR linker sends out
the stored KNX command for the corresponding scene.
6.3
KNX command initiates transmission of an IR Signal:
This is only possible with the scene module KNX to IR.
Figure 5: Scheme KNX command for sending an IR signal
1. The user sends the KNX command to activate the transmission process via the KNX
bus.
2. If a stored IR signal is found for this command, the Send LED flashes and the KNX IR
linker transmits the stored IR code of the corresponding scene.
