[13]
98MANALIDP10AV Rev. A 8/16/11
Process-Mounted Transmitter
Figure 3 shows the transmitter mounted to and supported by the process piping.
Pipe or Surface Mounted Transmitter
To mount the transmitter to a pipe or surface, use the Optional Mounting Set (Model Code
Option -M).
Referring to Figure 4, secure the mounting bracket to the transmitter using the two screws
pro- vided. Mount the transmitter with mounting bracket to a vertical or horizontal, DN 50
or 2-in pipe. To mount to a horizontal pipe, turn U-bolt 90 from the position shown in
Figure 4. The mounting bracket can also be used for wall mounting by securing the bracket
to a wall using the U-bolt mounting holes. Mounting kit extensions are available to allow
360° rotation of the top- works assembly. This provides better access to the rear vent/drain
when the transmitter is mounted to a surface as shown in Figure 4.
Summary of Contents for IDP10-A
