ViaSat Pace 460 User Manual Download

Page: 18 / 64

Using your Viasat box

Getting Started

❖

Changing the volume on your TV

◆

To change the volume on your TV set, press

vol +

vol -

◆

To turn your TV’s sound on or off, press

mute

❖

Using the channel banner

You can display the channel banner to find out:

◆

what is showing on any channel, now and later on;

◆

more about a programme you are interested in.

You can then use the channel banner to:

◆

tune to a programme you want to watch;

◆

record the programme you are watching, or a programme on a different channel;

◆

set a reminder for a future programme;

◆

set your box to record a future programme.

While the channel banner is displayed, you can continue to watch the current channel.

Displaying the channel banner

◆

To display the banner, press

Information about the programme on

now

displays.

◆

To display information about the programme on

next

, press

◆

To redisplay information about the programme on

now

, press

◆

To display extra programme information (see page 19), press

◆

To change which channel is highlighted by the channel banner, press

◆

To remove the banner, press

BACK

Note

This banner also displays briefly when you change channel. To set the length of time that the channel
banner displays on-screen, see page 49.

Summary of Contents for Pace 460

































































Search results

Summary of Contents for Pace 460

Reviews:

Related manuals for Pace 460

Brands by name

Popular brands

ViaSat Pace 460, User Manual

Search results

Summary of Contents for Pace 460

Reviews:

Related manuals for Pace 460

Brands by name

Popular brands