13
Installation
ENGLISH
1.
Insert one end of the supplied telephone lead into the telephone socket
(marked
TELEPHONE LINE
) on the rear panel of your box, as
shown in the diagram at the top of the page.
2.
If you need to use an adapter, choose the correct adapter for your
location. If you are not sure which one to use, compare with your
telephone connector.
Insert the free end of your supplied telephone lead into the RJ11 socket
on the adapter.
3.
Remove your telephone connector from your telephone wall socket.
Insert your telephone connector into the correct socket on your
adapter.
Insert the adapter into your telephone wall socket.
❖
Connecting a ‘magic eye’
You can connect a ‘magic eye’ (not supplied) to the secondary RF output
(marked
RF OUT - 2
) on the rear panel of your box, so that you can
operate your box from a different room.
To connect the ‘magic eye’, consult the instructions that came with it.
❖
Connecting to the mains supply
Once you have safely made all the other connections, you can connect your
box to the mains supply.
1.
Using the supplied mains lead, insert the box mains connector into the mains input (marked
230V
50Hz
) on your box, as shown in the diagram below.
2.
Connect the mains plug to the mains wall socket as shown in the diagram below.
3.
If there is a switch by the mains wall socket, switch it on.
4.
Connect your other equipment to the mains supply.
WARNING
DO NOT connect the mains plug to the wall socket until you have made ALL the
other connections
.
Adapter for Sweden
Adapter for Denmark
Adapter for Norway
and Finland
230V 50Hz
K
C
O
H
S
CI
R
T
C
E
L
E
F
O
K
SI
R
N
E
P
O
T
O
N
O
D
N
OI
T
U
A
C
1
2
Mains plug
Wall socket
Mains
connector
Mains input
