15
10
Instructions for product liquidation after its operating life
VIADRUS a.s. is contractual partner of firm EKO – KOM a.s. with client number F00120649.
The packages comply with
Č
SN EN 13427.
With respect to the fact that the product is designed out of common materials the individual parts are recommended to be liquidated in the
following manner:
-
exchanger (grey cast iron), by a company engaged in salvage and liquidation of waste
-
tube distributions, jacketing, by a company engaged in salvage and liquidation of waste
-
other metal parts, by a company engaged in salvage and liquidation of waste
-
sealing materials in common waste
We recommend to dispose the packages in the following way:
-
plastic foil, cardboard cover, use a salvage point
-
metal strapping tape, use a salvage point
-
wooden base, is designated for a single usage and no longer can be used as a product. Its disposal is subject to Act. 477/2001 Sb. a
185/2001 Coll.as amended.
In case that the product has lost its manufacture qualities there can be taken the advantage of product taking back (if this is
established), in case that the originator has declared that this is a waste and it must be handled according to the valid legislation of
the relevant country.
11
Warranty and defect liability
VIADRUS a.s. provides the basic guarantee period during 24 months from the sell-by date, but not longer than 30 months from the
dispatch date of the product from the production plant.
The condition for validity of the guarantee is observation of instructions for mounting, mainly as following:
•
Connection according to the schemes of the manufacturer by a qualified supply or mounting company with a valid mounting certificate.
•
Commissioning the product by a service company with a valid service certificate.
•
Observation of instructions specified in the Service and Installation Manual for the boiler.
•
Performance of regular inspections given by the manufacturer by a service company with a valid service certificate.
•
Evidencing all records about fulfilled guarantee and after-guarantee repairs and about performance of regular annual checks of the boiler
in the amendment to the guarantee card of this manual.
•
Usage of original spare parts supplied by the manufacturer.
•
Sending information to the manufacturer about commissioning the boiler (this information is to be sent by the end user – a consumer).
Mainly, it is necessary to specify when and by whom the boiler was commissioned, as well as it is necessary to specify a precise address
of operation of the boiler.
VIADRUS a.s. provides the extended guarantee period for the boiler drum during 60 months from the sell-by date, but not longer than
66 months from the dispatch date of the product from the production plant.
The condition for recognition of the extended guarantee period is the following:
•
Observation of the conditions for recognition of the basic guarantee period.
•
Sending information to the manufacturer about commissioning the boiler (this information is to be sent by a service company)
•
Fulfilment of regular service inspections within the range prescribed by the manufacturer, by a service company with a valid service
certificate.
In case of a claim of the boiler shell, a customer is obliged to present the packaging label of the boiler shell. It is placed on the
cardboard box, in which the boiler shell is transported.
The user is obliged to order removing defects only to a qualified contractual service organization accredited by the boiler
manufacturer – VIADRUS a.s., otherwise the guarantee for appropriate function of the boiler would not be valid. “Certificate of quality
and completeness of the boiler” serves – after its fulfilment – as a “Guarantee certificate”.
The user is obliged to perform regular maintenance of the boiler.
Each notification of defects has to be made immediately after their detection and always in written form and by phone.
In case of non-observance of the above mentioned instructions, the guarantee provided by the manufacturer is not admitted.
The manufacturer reserves the right for changes performed within innovation of the product, which don’t need to be included to this
manual.
The manufacturer is not liable for possible damages, if the product is not operated in accordance with the conditions specified in this
Service manual.
The grant does not apply for:
-
faults caused by improper assembly and improper attendance of the product and faults caused by improper maintenance see
chap. 8;
-
faults and damage caused by failure to observe water quality in heating system see chap. no. 4.1 and 5.3 or by using the anti-
freeze mixture;
-
faults caused by failure to observe instructions stated in this manual;
-
defects caused by a wrong assembly or incorrect operation of the product;
-
damage of the product during transfer or other mechanical damage;
-
the faults caused by natural disasters or force majeure;
-
defects caused by improper storage.
