13
15. To fit on the draught regulator the pull rod with chain let (in accordance with attached Manual of draught
regulator).
1
Left side part of cover with insulation (2 pcs of connecting pin)
2
Right side part of cover with insulation and front part of cover
(2 pcs connecting pins, 2 pcs door hinges, 8 pcs M4 x 6 screws, 8 pcs 4,3 washers)
3
Middle part of cover (4 pcs spring leave retainers, 1 pc magnetic element, 1 pc M5 nut)
4
Small ash pan with removable cover (1 pc removable cover, 1 pc 4,3 washer, 1 pc M4 butterfly nut)
5
Upper part of cover (1 pc front curtain, 1 pc pull rod console, 4 pcs spring leave retainers,
3 pcs ST 4,8x 9,5 screws, 2 pcs M5 x 12 screws)
Fig.
№
. 8
Location of connecting material in the boiler cover
