18
2.5.4
Change of Opening Direction of Stocking Door
1. Raise the upper part of cover (13).
2. Disassemble the stocking door (1) by taking 2 pcs of door pins off (7).
3. Remove 2 pcs of M10 x 55 screws (4) including 2 pcs of M10 nuts (5) and 2 pcs of 10,5 washers (6) into the
head metals on the left side.
4. Disassemble the support piece for the catch (9) and screw it on by means of 2 pcs of M8 x 12 screws (8) on the
right hand side.
5. Disassemble the protective plate of the stocking door with insulation (10) by releasing of 2 pcs M8 x 16 screws
(12) and 2 pcs of 8,4 washers (11). Take out the 8 x 30 pin (3) and the catch (2) from the stocking door.
Reassemble the protective plate with insulation. Remove the catch on the right side of the door and secure it by
the pin.
6. Hang the stocking door on the 2 pcs of M10 x 55 screws and secure it by 2 pcs of door pins.
7. Verify tightness of the areas of contact of the door.
1.
Stocking door
2.
Catch
3.
8x30 Pin
4.
M10x55 Screw
5.
M10 Nut
6.
10,5 Washer
7.
Door pin
8.
M8x12 Screw
9.
Supporting piece for catch
10. Protective plate of stocking door including Insulation
11. 8,4 Washer
12. M8 x 16 Screw
13. Upper part of cover
Fig.
№
. 12 Change of Opening Direction of Stocking Door
2.5.5
Assembly tools for brush
Use the leather gloves and common assembly tools for mounting or dismounting of the brush and the spike point
(if they are included in the delivery)
.
