background image

 

19

11.  IMPORTANT WARNINGS 

 
1.  The boiler only can be used for the purpose that it is destined for.  

2.  The boiler can only be operated by adult persons and it is forbidden to leave children at the boiler 

without being attended by adults. 

3.  The  boiler  is  not  destined  for  the  use  by  persons  (incl.  children)  whose  physical,  sensual  or 

mental  disability  or  lack  of  experience  and  knowledge  prevent  them  from  a  safe  use  of  the 
appliance unless they are supervised or if they were not instructed on the use of appliance by a 
person responsible for their safety.  

4.  Children should be supervised in order to ensure that they do not play with the appliance. 

5.  In  case  of  a  long-term  still-stand  of  boilers  they  must  be  disconnected  from  electricity  network- 

from the socket. 

6.  Boiler rooms must be kept clean and dustless. From the boiler room area there must be removed 

all  sources  of  pollution  and  during  the  works  (insulating  works,  boiler  room  cleaning)  which 
cause the dustiness the boiler must be put out of operation. Even the partial impurities deposits 
on the burner will degrade the combustion process and threaten an economic and reliable boiler 
operation. We don’t recommend to keep domestic animals (dogs, cats etc.) in boiler rooms  

7.  In  case  that  there  occurs  the  danger  of  flammable  vapours  or  gases  penetration  into  the  boiler 

room  or  during  the  works  at  which  there  is  a  temporary  fire  or  explosion  danger  (gluing  the 
flooring, paints using the flammable materials) the boiler must be long enough before the works 
put out of operation. 

8.  Don’t put any objects made of flammable materials on boiler and within a distance smaller than 

the safe distance from it. 

9.  It  is  necessary  to  install  a  safety  valve  for  maximum  overpressure  of  400  kPa (4  bar)  on  the 

system  and its dimension must correspond to the rated boiler output. The safety valve must be 
located  directly  behind  the  boiler.  Any  stop  valve  must  not  be  located  between  the  safety  valve 
and boiler. If you have any questions, please contact our contractual assembly firm and service 
organizations. 

10.  The  user  is  obliged  to  charge  with  boiler  commissioning,  its  regular  maintenance  and  defects 

elimination  only  a  professional  contractual  service  accredited  by  VIADRUS  a.s.,  the  boilers 
manufacturer,  otherwise  there  does  not  apply  the  guarantee  for  boilers  proper  function. 
“VIADRUS  HERCULES  U  22  P  and  VIADRUS  HERCULES  U  22  N  quality  and  completeness 
certificate“ filled in by the service contractual organization serves as the “Guarantee certificate“. 

11.  Once a year it is necessary to do a regular boiler maintenance according to chapter no. 10. 

12.  During  assembly,  installation  and  operation  of  the  appliance  it  is  necessary  to  comply  with 

standards that apply in the relevant country of destination. 

If these conditions are not observed the guarantee repairs cannot be required.  
 

 

Summary of Contents for HERCULES U 22

























Reviews: