VIA Technologies EPIA-SN, User Manual

Page: 47 / 88

BIOS Setup
39
IDE C
ONFIGURATION
Select Item
Exit
Select Screen
Go to Sub Screen
ESC
Save and Exit
General Help
Primary IDE Master [ Not Detected ]
BIOS SETUP UTILITY
Advanced
IDE Configuration
Parallel ATA IDE devices
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
F10
F1
Enter
Primary IDE Slave [ Not Detected ]
SATA Controller [ RAID ]
SATA Option ROM [ Enabled ]
Hard Disk Write Protect [ Disabled ]
IDE Detect Time Out (Sec) [ 35 ]
ATA(PI) 80 Pin Cable Detection [ Host ]
Options
IDE
RAID
AHCI
SATA Controller
Controls the features of the Serial ATA controller within the South Bridge.
Serial ATA is the latest generation of the ATA interface. Serial ATA hard
drives deliver transfer speeds of up to 300MB/sec.
Setting Description
IDE Supports two PATA hard disk drives. Disables RAID and AHCI
function.
RAID Only SATA supports RAID and AHCI function
AHCI Enable the AHCI function such as Native Command Queuing and
Hot Plug function
SATA Option ROM
Settings: [Disabled Enabled]
Hard Disk Write Protect
Protects the hard disk from copying and writing.
Settings: [Disabled, Enabled]