Chapter 3
30
IDE D
RIVES
: Move
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General
Help
Menu Level
To auto-detect the HDD's size,
head... channel
Item Help
IDE HDD Auto-Detection
[Press Enter]
Access Mode
[Auto]
Capacity
0 MB
Cylinder
0
Head
0
Precomp
0
Landing Zone
0
Sector
0
PIO Mode
[Auto]
IDE Channel 0 Master
[Auto]
Ultra DMA Mode
[Auto]
IDE Channel 0 Master
Phoenix - AwardBIOS CMOS Setup Utility
The specifications of your drive must match with the drive table. The hard
disk will not work properly if you enter incorrect information in this category.
Select “Auto” whenever possible. If you select “Manual”, make sure the
information is from your hard disk vendor or system manufacturer. Below is
a table that details required hard drive information when using the “Manual”
mode.
Setting Description
IDE Channel
The name of this match the name of the menu. Settings:
[None, Auto, Manual]
Access Mode
Settings: [CHS, LBA, Large, Auto]
Capacity
Formatted size of the storage device
Cylinder Number
of
cylinders
Head
Number of heads
Precomp Write
precompensation
Landing Zone
Cylinder location of the landing zone
Sector Number
of
sectors
PIO Mode
Settings: [0, 1, 2, 3, 4]
Ultra DMA Mode
Settings: [Disabled, Auto]
