Chapter 3
42
S
UPER
IO D
EVICE
: Move
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General
Help
Menu Level
Item Help
Onboard Serial Port
[Disabled]
UART Mode Select
IrDA
SuperIO Device
Phoenix - AwardBIOS CMOS Setup Utility
RxD, TxD Active
[Hi, Hi]
IR Transmission Delay
[Disabled]
UR2 Duplex Mode
[Half]
Use IR Pins
[IR-Rx2Tx2]
Onboard Serial Port
Sets the base I/O port address and IRQ for the onboard serial ports A and B.
Selecting “Auto” allows the BIOS to automatically determine the correct base
I/O port address.
Port Settings
Disabled
3F8
IRQ4
2F8
IRQ3
3E8
IRQ4
2E8
IRQ3
Auto
UART Mode Select
Settings: [IrDA]
RxD, TxD Active
Settings: [Hi.Hi, Hi.Lo, Lo.Hi, Lo.Lo]
IR Transmission Delay
Settings: [Disabled, Enabled]
UR2 Duplex Mode
Settings: [Full, Half]
Use IR Pins
Settings: [RxD2.TxD2, IR-Rx2Tx2]
