Chapter 3
40
I
NTEGRATED
P
ERIPHERALS
: Move
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General
Help
Menu Level
Item Help
SuperIO Device
[Press Enter]
Onboard IDE Channel 2
[Enabled]
IDE Prefetch Mode
[Enabled]
OnChip SATA
[Enabled]
SATA Mode
[RAID]
AC97 Audio
[Auto]
VIA OnChip LAN
[Enabled]
Onboard LAN Boot ROM
[Disabled]
OnChip USB Controller
[All Enabled]
OnChip EHCI Controller
[Enabled]
USB Emulation
[On]
Onboard IDE Channel 1
[Enabled]
Integrated Peripherals
Phoenix - AwardBIOS CMOS Setup Utility
Onboard IDE Channel 1 and 2
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. When set to “Enabled”, each channel is activated
separately.
Settings: [Enabled, Disabled]
IDE Prefetch Mode
This allows the hard disk controller to use the fast block mode to transfer
data to and from the hard disk drive. Block mode is also called block transfer,
multiple commands or multiple sector read/write. When set to “Enabled”,
block mode is enabled.
Settings: [Enabled, Disabled]
OnChip SATA
Settings: [Enabled, Disabled]
SATA Mode
Serial ATA is the latest generation of the ATA interface. Serial ATA hard
drives deliver transfer speeds of up to 150MB/sec.
Settings: [IDE, RAID]
