Installation
11
C
ONNECTING THE
P
OWER
S
UPPLY
The VIA EPIA-N Nano-ITX mainboard requires a special power cable adapter
to connect to a conventional ATX power supply. Before inserting the power
supply connector, always make sure that all components are installed
correctly to ensure that no damage will be caused.
Nano-ITX 12-Pin Power Connector
To connect the ATX power supply, make sure the power cable pins are
properly aligned. Then insert the plug firmly into the connector.
Pin Signal
1 +3.3V
2 +3.3V
3 +3.3V
4 +5VSUS
5 GND
6 +12V
7 -PSON
8 +5V
9 GND
10 +5V
11 GND
12 PWRGD
Nano-ITX PWR
11
2
12
1
