![background image](http://html1.mh-extra.com/html/vetus/ghs14/ghs14_operation-manual_1010454054.webp)
When a fault occurs, check the following before carrying out the
tests in the Table:
• The circuit breaker is ‘ON’.
• The generator has not suffered any mechanical damage.
• It has not been affected by spilt oil, fuel, dirt or chemicals. If
this is the case, clean or repair this before starting testing.
• The voltage regulator has not been exposed to water. If the
regulator is wet, remove it from the connector box and dry
thoroughly before refitting.
52
Fault Finding, generator
General
7
Summary of Contents for GHS14
Page 307: ...305 10 Hovedm l Huvuddimensioner Viktigste m l P mitoitukset...
Page 310: ...308 10...
Page 311: ...309...