Vetter ManuTel SlimLine Operating Instructions Manual Download

Page: 36 / 43

6.5

After completion of maintenance work

Personnel:

Driver of industrial trucks

Protective equipment:

Protective work clothing

Industrial helmet

Protective gloves

Safety shoes

Carry out the following steps upon completion of maintenance work or troubleshooting
and before returning the Manu

Tel

Slim

Line

and industrial truck to service:

Check that all previously loosened screw connections are seated securely.

Reset the lift truck fuse.

Ensure that all tools, materials and other equipment have been removed from the

work area.

Clean the work area and remove any leaked materials such as e.g. liquids, pro-

cessing materials or similar.

Ensure that all safety equipment functions faultlessly.

Maintenance

After completion of maintenance work

V1.09/2019

ManuTel

telescopic fork arm Type SlimLine

Summary of Contents for ManuTel SlimLine












































Search results

Summary of Contents for ManuTel SlimLine

Reviews:

Related manuals for ManuTel SlimLine

Brands by name

Popular brands

Vetter ManuTel SlimLine, Operating Instructions Manual

Search results

Summary of Contents for ManuTel SlimLine

Reviews:

Related manuals for ManuTel SlimLine

Brands by name

Popular brands