Vetter ManuTel SlimLine, Operating Instructions Manual

Page: 26 / 43

Fig. 10: Locking device of the locking pin
Fig. 11: Removing the locking pin
1. Press in the pressure point of the locking pin from above (Fig. 11/1).
ð
The yellow marking becomes visible and the lock opens (Fig. 10).
2. Press up the locking pin when it is in pressed-in state by pressing it from below at
the same time (Fig. 11/2).
3. Remove the locking pin from the basic fork arm (Fig. 11/3).
4. Take hold of the recessed grip below the tip of the coupling and move the slip-on
coupling to the desired blade length.
NOTICE!
Avoid pulling the coupling out abruptly to the end stop, as the
retainer or the pull-out protection can be damaged if you do so.
Operation
Telescoping the ManuTel® SlimLine
V1.09/2019 ManuTel ® telescopic fork arm Type SlimLine 26