23
+1-215-667-8990
The
Body Unit
connects all of the modular sections together through snap-fit, hook &
loop, and spring-activated hook connections as demonstrated in
Figure 10-7
. The body
unit provides a secure connection point from the straps all the way to the camera unit
to assure a secure fit. It has hook adhesive strips (velcro) along the internal surface
of the body unit to
connect to the cushion.
Additionally, the body unit
has connection points
to which the strap and
camera unit can secure.
The Cushion in Figure 10-7
provides a comfortable
and light-proof seal
around the eyes with
a continuous surface
that wraps around the
forehead and on the
bridge of the nose. The
cushion connects to the
hook surface of the body
unit with embedded strips
of loop material. The
cushion is the primary
surface that contacts
the patient’s body.
The
Strap
has two strap
connectors that snap
into a receiving section
on the body unit. The
connector can be
released by pinching it
with two fingers to allow
for quick removal of
the goggles if needed.
Figure 10-8
shows the strap has strap adjusters on each
side to allow for tightening and loosening of the goggles during donning and
doffing. The section of the strap that connects with the back of the patient’s head is
designed to improve the security of the strap with a split opening in the middle.
Figure10-8
Figure10-7