English - 89 -
Broadband ISP
connection
A Wireless-N router (IEEE 802.11a/b/g/n)
with simultaneous 2.4 and 5 GHz bands is
designed to increase bandwidth. These are
optimized for smoother and faster HD video
streaming, file transfers and wireless gaming.
ĐƋ
The frequency and channel differ depending
on the area.
ĐƋ
The transmission speed differs depending
on the distance and number of obstructions
between the transmission products, the
configuration of these products, the radio
wave conditions, the line traffic and the
products that you use. The transmission
may also be cut off or may get disconnected
depending on the radio wave conditions,
DECT phones or any other WiFi 11b
appliances. The standard values of the
transmission speed are the theoretical
maximum values for the wireless standards.
They are not the actual speeds of data
transmission.
ĐƋ
The location where the transmission is most
effective differs depending on the usage
environment.
ĐƋ
The Wireless feature of the TV supports
802.11 a,b,g & n type modems. It is highly
recommended that you should use the IEEE
802.11n communication protocol in order to
avoid any possible problems while watching
videos.
ĐƋ
You must change your modem’s SSID when
there are any other modems around with the
same SSID. You can encounter connection
problems otherwise. Use a wired connection
if you experience problems with a wireless
connection.
Configuring Wireless Device Settings
Open the
Network/Internet Settings
menu
and select
Network Type
as
Wireless Device
to start connection process.
The TV will scan the wireless networks
automatically. A list of available networks
will be displayed. Please select your desired
network from the list.
NOTE:
If the modem supports N mode, you
should set N mode settings.
If the selected network is protected with a
password, please enter the correct key by using
the virtual keyboard. You can use this keyboard
via the directional buttons and the
OK
button
on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now
established. To disconnect from a wireless
network, highlight
Network Type
and press
Left or Right buttons to set as
Disabled
.
Highlight
Internet Speed Test
and press the
OK
button to check your internet connection
speed. Highlight
Advanced
Settings
and press
the
OK
button to open the advanced setting
menu. Use directional and numeric buttons
to set. Press the
OK
button to save settings
when complete.
Other Information
The status of the connection will be displayed as
Connected
or
Not
Connected
and
the current
IP address, if a connection is established.
Connecting to your mobile device via WiFi
ĐƋ
If your mobile device has WiFi feature, you
can connect it to your TV via a router, in order
to access the content in your device. For this,
your mobile device must have an appropriate
sharing software.
Summary of Contents for 49FB7500
Page 1: ...TELEViZYON KULLANIM KILAVUZU SMART 49FB7500 49 LED TV OPERATING INSTRUCTIONS ...
Page 112: ......
Page 113: ......
Page 114: ......
