English
- 80 -
Virtual Remote
Enable or disable the virtual remote feature.
CEC
With this setting you can enable and disable CEC functionality completely. Press Left or
Right button to enable or disable the feature.
CEC Auto Power
On
This function allows the connected HDMI-CEC compatible device to turn on the TV and switch
to its input source automatically. Press
Left
or
Right
button to enable or disable the feature.
Speakers
To hear the TV audio from the connected compatible audio device set as
Amplifier
. You
can use the remote control of the TV to control the volume of the audio device.
Smart Remote
Press
OK
to open the Smart Remote menu screen. Using this screen you can discover and
connect the remote controller devices to your TV wirelessly.
Quickstandby
If this feature is enabled the TV can be turned on again through the virtual remote in the
Smart Center application if it is turned off through it. Press
Left
or
Right
button to enable or
disable the feature.
Installation Menu Contents
TKGS
Installation
Displays
TKGS Installation
menu options. This option may not be available according to the selected
Satellite Operator
in the
First Time Installation
. If not, re-do the
First Time Installation
and select
the
Satellite Operator
as
TKGS
.
Automatic
channel scan
(Retune)
Displays automatic tuning options.
Digital Aerial:
Searches and stores aerial DVB stations.
Digital
Cable:
Searches and stores cable DVB stations.
Analogue:
Searches and stores analogue stations.
Satellite:
Searches and stores satellite stations.
Manual channel
scan
This feature can be used for direct broadcast entry.
Network channel
scan
Searches for the linked channels in the broadcast system.
Digital Aerial:
Searches for aerial network
channels.
Digital Cable:
Searches for cable network channels.
Analogue fine
tune
You can use this setting for fine tuning analogue channels. This feature is not available if no analogue
channels are stored.
Satellite Settings
Displays satellite settings.
Satellite list:
Displays available satellites. You can
Add
,
Delete
satellites or
Edit
satellite settings on the list.
Antenna installation:
You can change satellite anntenna settings and/
or start a satellite scan.
SatcoDX:
You can upload or download SatcoDX data using the related options.
Installation
Settings
(Optional)
Displays installation settings menu.
Standby Search:
Your TV will search for new or missing channels
while in standby. Any new found broadcasts will be shown.
Clear Service
List
Use this setting to clear channels stored. This setting is visible only when the
Country
option is set to
Denmark, Sweden, Norway or Finland.
Select Active
Network
This setting allows you to select only the broadcasts within the selected network to be listed in the
channel list. This feature is available only for the country option of Norway.
First time
installation
Deletes all stored channels and settings, resets TV to factory settings.
Summary of Contents for 49FB7500
Page 1: ...TELEViZYON KULLANIM KILAVUZU SMART 49FB7500 49 LED TV OPERATING INSTRUCTIONS ...
Page 112: ......
Page 113: ......
Page 114: ......
