Subject to modifications.
© Vestamatic GmbH
2/7
G
H O M E ∙ VL-ME-230-45
Art.-Nr.:
1100 001 GB
1518 A08
• Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach
• www.vestamatic.com
2. Short description
Motor 45 mm tube diameter for roller shutters
Programmable upper and lower limit position
Limit positions can be virtual or physical (upper position)
Parallel connection allowed
Anti-block function
Simple setting of the limit position with the “VL-Progset-ME/SMI-230”
(Art.-no.: 54185775)
Re-synchronisation of physical limit positions
Cable 2.5 m white
4. Intended use
These types of tubular motor described in these manual is intended solely
for roller shutters. These types of tubular motor cannot be used in poten-
tially explosive area.
These types of tubular motor are designed for using in a single roller shut-
ter system.
3. Scope of delivery
Motor 45 mm tube diameter with 2.5 m connection cable
Operating instructions
Adapter set, comprising tube adapter / adapter ring
Mounting-kit, comprising safety clip / safety cotter
5. Technical data
Article
VL-ME-230-45 / 10Nm
20Nm
30Nm
50Nm
Art.-no.: 01066110 01066120 01066130 01066140
Torque (nominal)
Nm
10
20
30
50
Output speed
rpm
15
15
15
12
Tractive power
kg*
20
40
55
95
Supply voltage
VAC
230
230
230
230
Frequency
Hz
50
50
50
50
Rated power
W
126
165
227
227
Rated current
A
0.55
0.72
0.99
0.99
Running time
Min.
4
4
4
4
Protection degree IP
44
44
44
44
Length L1
mm
461
481
522
551
*
Calculation method: 60 mm octagonal shaft, 1.5 m roller shutter height, regardless
of installation situation, spline, width and friction losses.
6. Installation, assembly, disassembly
Wiring diagram
ATTENTION!
Parallel control of more than one conventional drive motor can
only be implemented by means of isolating relays.
Ä
Wire colours of motor connection cables:
– green/yellow: ground conductor / PE – brown: phase turning direction 1
– blue:
neutral conductor / N – black: phase turning direction 2
Fig. 4.1
Fig. 4.2
Fig. 4.3
Fig. 4.4
Fig. 4.5
