Subject to modifications.
© Vestamatic GmbH
4/7
G
H O M E · VL-ME-230-45
Art.-Nr.:
1100 001 GB
1518 A08
• Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach
• www.vestamatic.com
Description of installation tool VL-Progset-ME/SMI-230
UP + green LED – Virtual upper limit set
yellow LED – Intermediate position
DOWN + red LED – Virtual lower limit set
green LED – Power
red LED – Change turning direction
Virtual upper limit
Intermediate position
Virtual lower limit
Reset
Change turning direction
Left side: Motor control
Right side: Motor programming
Motor control
Motor programming
Button
Control motor in
UP
direction
Hold down the button to move the motor in
UP
direction.
green
Button
Set “Virtual upper limit position”.
LED
green LED
– Virtual upper limit position:
OFF
when no “Virtual upper limit” is set.
Blinking
when programming “Virtual upper limit”
or “RESET” is in progress.
Lit solid
when “Virtual upper limit” programming
sequence has completed.
LED
yellow LED
– Intermediate position:
yellow
Button
Set “Intermediate position”.
Hint:
Intermediate position:
Not used for these
motor devices.
OFF
when no “Intermediate position” is set.
Blinking
when programming “Intermediate
position” is in progress.
Lit solid
when “Intermediate position” pro gramming
sequence has been completed.
Button
Control motor in
DOWN
direction
Hold down the button to move the motor in
DOWN
direction.
red
Button
Set “Virtual lower limit position”.
LED
red LED
– Virtual lower limit position:
OFF
when no “Virtual lower limit” is set.
Blinking
when programming “Virtual lower limit”
or “RESET” is in progress.
Lit solid
when “Virtual lower limit” programming
sequence has completed.
LED
green LED
– Power:
OFF
when powerless (it is safe to connect
a motor to the Installation Tool).
green
Button
Reset
Lit solid
when attached to mains 230VAC.
LED
red LED
– Change turning direction:
OFF
when no “Change turning direction”
is used.
red
Button
Change motor turning direction.
Blinking
when “Change motor turning direction”
programming sequence is in progress.
Lit solid
when “Change motor turning direction”
programming sequence has completed.
