Operation with sun (automatic operation)
Push the selector switch to the left in
order to activate the sun function (
S
).
In this operation mode the sunshade
drives extend the sunshade automati-
cally as soon as the preset sun
threshold value is attained.
The pre-requisite to extend the sun-
shade is fulfilled when the signal LED
wind (
w
) lit up
green
and the LED
sun (
S
) lit up or flashing
green. As
soon as one of the LEDs lit up red, the
sunshade drives will retract the sun-
shade (see page 48, 49).
If the wind speed threshold value is not exceeded, the automatic con-
trol of sunshade drives can be interrupted any time by pressing the
corresponding direction buttons.
G
-
43 -
Operation with sun (automatic operation)
Note:
If a tilting function has been programmed with the DIP
switches, the sunshade drives will shortly move the sun-
shade in the opposite direction, which will tighten the
awning cloth on accurately position the slat angle of the
blinds (adjustable tilting time).
Attention: If the wind velocity exceeds the preset value, extend-
ing the sunshade is not possible for safety reasons.
Following the functions will be explained more detailled.
G
-
44 -
