Setting the tilting pulse
The setting for the tilting pulse depends on size and design of sun-
shade. The
Vestamatic
Markise Plus 500 V 2.0
sunshade control
can
send a tilting pulse to the drive connected to the sunshade after the
motor run time has elapsed (please see page 37). The sunshade
will
shortly move into the opposite direction (retract) in order to tighten the
awning cloth or accurately position the slat angle of the blinds.
In both operation modes with or without sun, after extending the sun-
shade a tilting function will be executed. If the extend button would be
pushed during the extension of the sunshade, there will be no tilting
function executed after extending the sunshade. If the motor runtime is
set to IDS, there also will be no tilting function executed.
The preset default setting for the tilting pulse is 0 seconds.
(DIP switch on the front side of the device)
Y1234tzuiX
Example for the DIP switch setting:
no tilting pulse
The DIP switches S5 – S8 are all
designated for setting the motor run time
(please see page 37).
G
-
39 -
Setting the tilting pulse
G
-
40 -
S1
S2
S3
S4
Tilting time
in seconds
OFF
OFF
OFF
OFF
no tilting
OFF
OFF
OFF
ON
0.34
OFF
OFF
ON
OFF
0.46
OFF
OFF
ON
ON
0.57
OFF
ON
OFF
OFF
0.69
OFF
ON
OFF
ON
0.80
OFF
ON
ON
OFF
0.92
OFF
ON
ON
ON
1.03
ON
OFF
OFF
OFF
1.15
ON
OFF
OFF
ON
1.26
ON
OFF
ON
OFF
1.38
ON
OFF
ON
ON
1.49
ON
ON
OFF
OFF
1.61
ON
ON
OFF
ON
1.72
ON
ON
ON
OFF
1,84
ON
ON
ON
ON
1.95
