Setting the wind speed threshold value
The setting for the wind speed threshold value depends on size and
design of sunshade.
If the measured wind velocity exceeds the preset threshold value, the
sunshade will be retracted immediately. Extending the sunshade is
only possibly after a reset delay of 16 minutes has elapsed.
The preset default setting for the wind speed threshold value is 8 m/s
or
28.8 km/h.
(DIP switch on the rear panel of the device)
Y1“34tX
Example for the DIP switch setting of a wind
speed threshold value of 8 m/s (28.8 km/h).
The DIP switch S5 is used to set the operation
mode (see page 34).
Annotation:
If no wind meter is connected, set the wind velocity
to 72 km/h, in order to disable the wind meter moni-
toring (please see page 47) and bridge terminal 7
and 8 by a wire.
G
-
35 -
Setting the wind speed threshold value
G
-
36 -
S1
S2
S3
S4
m/s
km/h
Wind speeds on the
Beaufort scale
OFF
OFF
OFF
OFF
3
10.8
3 (gentle breeze)
OFF
OFF
OFF
ON
5
18.0
3 (gentle breeze)
OFF
OFF
ON
OFF
6
21.6
4 (moderate breeze)
OFF
OFF
ON
ON
7
25.2
4 (moderate breeze)
OFF
ON
OFF
OFF
8
28.8
4 (moderate breeze)
OFF
ON
OFF
ON
9
32.4
5 (fresh breeze)
OFF
ON
ON
OFF
10
36.0
5 (fresh breeze)
OFF
ON
ON
ON
11
39.6
6 (strong breeze)
ON
OFF
OFF
OFF
12
43.2
6 (strong breeze)
ON
OFF
OFF
ON
13
46.8
6 (strong breeze)
ON
OFF
ON
OFF
14
50.4
7 (moderate gale)
ON
OFF
ON
ON
15
54.0
7 (moderate gale)
ON
ON
OFF
OFF
16
57.6
7 (moderate gale)
ON
ON
OFF
ON
17
61.2
7 (moderate gale)
ON
ON
ON
OFF
18
64.8
8 (fresh gale)
ON
ON
ON
ON
20
72.0
wind meter monitoring deactivated
Annotation:
If no wind meter is connected, please bridge terminal 7 and 8 by a wire.
