14
Installation Manual
Mounting on the floor
To mount the water heater on the floor:
1
Check that the floor is even and rigid enough to support the
water heater.
2
Place the water heater 6" (150 mm) above the floor and level
the rubber feet for balance.
6" (152 mm) min.
Notice
•
To prevent vibration and reduce operational noise, mount the water
heater on the floor in front of the wall and use the mounting bracket
to affix the water heater to the wall.
•
For more information about how to use the mounting bracket, refer
to
"Mounting to the wall"
on page 14.
Water heater stand for commercial food service
Per ANSI/NSF-5, standing directly on a hard surface is not an
acceptable installation method. The unit must be elevated at least
6" (152 mm) off the floor. This mounting clearance provides access
for clearing any possible debris or accumulated water seepage that
may occur beneath the unit.
Mounting to the wall
To mount the water heater to the wall:
1
Check that the wall is level and can support the weight of the
water heater.
2
Affix the mounting bracket securely to the wall.
3
Align the grooves on the back of the water heater with the
tongues on the mounting bracket and hang the water heater
from the bracket.
Summary of Contents for VH-150
Page 46: ...Memo ...
Page 47: ...Memo ...
