42
6.8. Request Media
Selecting the device tick box and pressing “
Request Media
” to manually control the selected
PIR Camera, PIR Video Camera or IP Camera to take a picture or video. (PIR Camera: takes 1
picture. PIR Video Camera: record a 10-second video clip. IP Camera: a video according to the
IP Camera’s video length setting.).
The requested picture and video clip from PIR Camera/Video Camera can be viewed in
“Captured Event” webpage. The IP Camera’s video clips can only be viewed on the IP Camera
webpage or through the Control Panel’s Home Portal Server account.
6.9. Power Switch Control
This section is for you to control Power Switch in the system
Switch On:
Select the desired Power Switch, then choose the time length you want to
turn on the Power Switch, then click “Switch On” to confirm.
Switch Off:
Select the desired Power Switch, then click “Switch Off” to turn off.
Switch Toggle:
Select the desired Power Switch, the click “Switch Toggle.” If the Power
Switch is on, it will be turned off; if the Power Switch is off, it will be turned on instead.
Switch Level (%):
This function is for Power Switch with Dimmer function only. Select the
desired Power Switch with Dimmer, then choose the power level percentage you want to
adjust. Click “Switch Level %” to confirm the change.
Group Switch On:
You can control Power Switches assgined to one group together.
Select the desired Power Switch group, then choose the time length you want to turn on
the Power Switches, then click “Group Switch On” to confirm.
Group Switch Off:
Select the desired Power Switch group, then click “Group Switch Off”
to turn off.
6.10. Siren Learning/Control
This section is for you to learn in Indoor Siren or Outdoor Bell Box, and edit their settings.
Learn Siren:
To learn in siren:
1. Put the siren into learning mode (Please refer to siren manual for detail)
2. Click “Learn Siren” to transmit a learn code.
3. Refer to siren manual to complete the learn in process.
Siren Tamper:
This is for you to enable/disable the siren tamper protection.
Select On/Off, then click “Siren Tamper” to confirm setting.
Confirm:
This is for you to set whether the siren should emit beeping sound when the
system is armed or disarmed.
Select On/Off, then click “Confirm” to confirm setting.
Entry Sound:
This is for you to set whether the siren should beep warning sound during
