26
5.5. Network
This page is for you to configure network settings.
DHCP
On:
If DHCP is set to On, the Network will obtain the IP address automatically with a
valid Network DHCP Server. Therefore, you won’t need to do any settings. You can
only set DHCP to On if your Network environment supports DHCP. It will automatically
generate all information.
Off:
If DHCP is set to Off, you neet to enter the Network information manually for IP
Address, Subnet mask, Default gateway, Default DNS. Please make sure that you
have obtained all required values according to your Network environment. Please
contact your local service provider for more information.
SNTP
SNTP setting is for you to enter an internet time server to synchronize and update Control
Panel time automatically according to set interval times
SMTP
SMTP setting is for you to program the mail server related settings. The email account you
set here would be used to send email reports or email the triggered images/videos from
PIR Camera/Video Camera. For email report or upload destination, please refer to
Report
or
Upload
section.
The format of SMTP setting is:
smtp://user:password@mail server
User:
email account user name. For example, if your email account is
,
enter
john
.
