Vesta MZ-1, Installation Manual

Page: 22 / 87

19
mailto: john@yahoo.com
Reporting type Email Account
<
<
N
N
O
O
T
T
E
E
>
>

Reporting type must be entered in lowercase letters

SMTP setting must be completed first for email reporting to function.

Groups :
You can assign reporting destinations to different groups, the reporting groups function
according to the following rules:

The reporting priority is based on to group number sequence. From Group 1

Group

Group 2

Group 3

….etc

When more than one reporting destinations are assigned to a group, if a report is sent
to one of the detinations successfully, the system will stop reporting to the rest of the
reporting destination in the same group and move on to report to the next group.
If the Control Panel fails to send report to the first detination in a group, it will move on
to the next reporting destination. If reporting to all destinations in the group fails, the
Control Panel will retry the report group for 2 times before moving on to the next group.
If the Control Panel fails to report to all reporting groups, it will restart reporting from
Group 1 until at least one groups successfully receives the report.

For GSM CID/CSD reporting, if GSM CID/CSD report fails, the pale will redial the
telephone numbers for a maximum of 15 dial attempts, divided among all GSM
CID/CSD telephone numbers.
Example:
1. If the panel has programmed 3 GSM CID/CSD telephone number, the panel
will rety each number for 5 times for a total of 15 times.
2. If the panel has programmed 4 GSM CID/CSD telephone number, the panel
will rety telephone number 1~3 for 4 times each, and telephone number 4 for
3 times for a total of 15 times.
3. If the panel has programmed 5 GSM CID/CSD telephone number, the panel
will rety each number for 3 times for a total of 15 times.

For Voice reporting , if Voice report to telephone number fails, the pale will retry
each number to 5 times, and up to 15 times in total.
Voice reporting follows the same retry rule as GSM CID/CSD reporting, however
the Voice reporting retry times are calculated separately from GSM CID/CSD
retries.

Level :
You can assign reporting destinations to report different events, options include:

All Events: The Control Panel will report both alarm and system status events to this
reporting destination.

Status Events: The Control Panel will only report system status events to this reporting
destination.

Alarm Event: The Control Panel will only report alarm events to this reporting
destination.