2015.A
8
Symptoms
Causes
Solutions
Power on, but the power
indicator is not on and the
appliance does not heat
up.
1. The plug is not in
place.
2. The micro switch is in
bad
contact.
It
is
disconnected.
1. Plug in again.
2. Regulate
the
limit
distance of the switch.
The heating indicator is
on, but the oil temperature
does not rise.
1. Connection of heating
element is loose or falls
off.
2. The heating element is
burnt out.
1. Fasten the connecting
wires and screws on
both end.
2. Replace
the
heating
element.
The power indicator is on,
after
having
the
temperature
set,
the
temperature does not rise.
1. The thermostat is burnt
out.
1. Replace the thermostat.
Oil temperature control is
normal, but the indicator is
not on.
1. The indicator is burnt
out.
1. Replace the indicator.
After circulating heating
up to high temperature,
the heating element does
not heat up again.
1. The
TEMP
limit
protector activates.
1. Manual reset
“overheat
protection reset button
”.
Oil
temperature keeps
rising and out of control.
1. The
TEMP
limit
protector is defective.
1. Replace the protector.
Aforementioned troubles are just for reference. If any failure occurs,
please stop using, and inform the professional technicians to check and
repair.
