2015.A
6
in tank. Then, pull out the electrical box from the slot at rear of the bottom case. At
this moment, the heating elements are separated from the tank body completely with
the electrical box, put it on a clean area. Then lift out the tank for a thorough cleaning.
9. For safety and durability sake, users should remove the residues in tank and dirt on
heating elements regularly to keep the tank and elements in long-term clean state.
10. The oil partition in tank is designed for heating element protection. During frying, the
partition shall be put into the tank.
11. The electrical box is equipped with a thermal breaker, whose operating temperature
is 446
℉
(230
℃
) while the manual reset temperature is <330
℉
(165
℃
). Also, an
“overheat protection reset button” is provided at lower part of the box exterior. It
activates to protect the appliance once the oil is over-temperature. For reuse, press
the reset button to reset, only then can the appliance be used normally.
12. There is a micro limit switch in the electrical box, which is connected when the box is
inserted into the slot in the bottom case, and disconnected while the box is lifted from
the slot.
13. Fresh vegetable oil (or pastry oil) should be used instead of used oil which may lower
the flash point and cause excessive ebullition.
5.2 Function:
Main function of the fryer is to fry food in a constant temperature. Cook temperature could
be set by the thermostat in according to food type with a range of 122
℉
(50
℃
)
～
374
℉
(190
℃
).
6. Routine Inspection
1. Stop using if user feels that there are some problems in the pipeline or machine.
2. Check the situation of the machine before or after using everyday.
3. Check that whether the machine is tilted before using.
4. Check that whether the control panel is damaged.
5. Check that whether there is strange odor or smell during using.
6. Check that whether there is vibration noise.
7. Cleaning & Maintenance
1. Before cleaning, cut off the power supply first to prevent unexpected accidents.
2. After working everyday, clean the furnace surfaces and power cord with wet towel
containing non-corrosive detergent. Do not aim at the appliance with water jet directly.
Water infiltration may damage the electric performance and cause electricity safety
accident.
3. If not going to use the appliance at any time, turn off the thermostat and power switch.
4. If not going to use the appliance for a long period of time, clean it completely and
store it in a well-ventilated warehouse without any corrosive gases.