Vessel Stat-Clean SH Series, Instruction Manual

Page: 38 / 40

38
Storage
Storage
CAUTIONS
PROHIBITED
Do not store the eraser in the following types of places. There is a risk of failure.
* Where the eraser could be subject to strong vibration or shock
* Where the temperature or humidity exceeds the specified range
* Where dew condenses
* Where the temperature fluctuates suddenly
* Where there is a risk of flammable solvents or dust, etc., igniting or exploding
* Where there are high levels of dust or smoke
* Where water, oil or chemicals, etc., could get on the eraser
* Where strong electric or magnetic fields are generated
Troubleshooting
Troubleshooting
If an abnormality occurs, always disconnect the power cord before identifying the cause.
Contact the distributor for repairs."
Details of abnormality Cause and inspection Remedy
Cannot remove static
electricity
Check whether the electrode
needles are dirty.
Clean the electrode needles.
Check whether the power supply
unit is operating. Disconnect the power supply
unit's power.
Check whether there is any
conductive material around the
eraser. (See page 33.)
Move conductive materials
away from the eraser.
Check the length of the power
cable. (See page 34.)
If the cable is too long, the
voltage could drop and prevent
normal operation.
The static electricity
removal performance
has dropped.
Check the pulse ratio. Adjust the pulse ratio.
Check whether there are any
conductive materials around the
eraser or whether the erasers are
installed too close.