Vessel Stat-Clean SH Series, Instruction Manual

Page: 34 / 40

34
Installation
Installation distance and cable length
CAUTIONS
REMEMBER
Always attach the enclosed cap to any idle high-voltage output sockets.
Entry of dust into the high-voltage output socket can result in failure."
REMEMBER
The power cable supplies a high-voltage.
Make sure it does not bend excessively and break or deform from pulling.
Cable length
Plan the length of the power cable from the power supply unit (SH-G3) based on the following
configuration drawing.
Example 1
SH-GSH-G3 A socket = 3 m + 2.3 m = 7.6 m
SH-G3 B socket = 2.3 m
Total cable length = A B socket = 9.9 m
Example 2
SH-GSH-G3 A socket = 5 m + 2.3 m = 7.3 m
SH-G3 B socket = 2.3 m
Total cable length = A B socket = 9.6 m
Example 3
SH-SH-G3 A socket = 5 m + 5 m = 10 m
SH-G3 B socket = 0 m
Total cable length = A B socket = 10 m
* The cable length can be wired up to a total of 10 m from the A and B high-voltage output sockets.
* Up to three SH bars can be connected from one power supply unit (SH-G3).