- 49 -
Setup Mode
Setup mode is entered by selecting Setup from the main menu on the situation display. In
setup mode the list of available setting groups are displayed. Scroll through the list and
select the setting group you wish to change. You may then follow the same procedure to
select the specific setting you wish to change and a pop up box is displayed with the
available options for that setting.
Note:
Filter and alarm settings are associated with a profile and only the settings in the
currently active profile may be changed. If you wish to change the settings for a different
profile, you must select the profile before entering setup mode.
While the settings screen is displayed, you can use the following buttons:
▲
Highlight the previous setting. This button is only active if it is possible to scroll up.
▼
Highlight the next setting. This button is only active if it is possible to scroll down.
Select Change the highlighted setting.
Home Save any changes and return to the situation display.
Any changes you make to settings are stored permanently until you change them again,
even if you turn off the power.
Target List Settings
Data display in
target list
Choose whether to display each target's SOG or CPA in the target list.
The default is to display CPA in the target list.
However, if you are not using the target speed filter you may find it
useful to display the target's speed instead.
Sort targets by
priority
Displays targets sorted by their priority. A target's priority is based on
its CPA, time until CPA (TCPA), range, and speed. You can choose to
disable this setting and targets will be displayed in the order in which
data was first received from a target.
Inactive target
display time
Selects how many minutes to display a target that is no longer being
received.
