- 28 -
Range Rings
The outer range ring corresponds to the current plotting range. The inner range ring is ½ the
plotting range.
If the guard alarm is enabled an additional dotted range ring is drawn to indicate its position.
Plotting Range
The plotting range may be changed by using the
Menu
button.
Target count
The count of all targets includes targets which are not visible on the plotting display because
they are either out of range or have not sent a position report yet. The count does not
include targets which are being filtered based on the current profile settings. If targets are
being filtered, the number of filtered targets is also shown.
Selecting a Target
Use the
Next
and
Prev
buttons to select targets. When you select a target a small
information window appears. Press the
Select
button to see the full target details.
From the situation screen you may use the following buttons:
Next
Select the next target. Targets are selected in priority order. The
Next
button starts
with the highest priority target. The list of visible targets may be scrolled with the
Next
button and when no more targets are available, the current selection is
cleared.
Prev
Select the previous target. The
Prev
button starts with the lowest priority target.
When no more targets are available, the current selection is cleared.
Select Display the target details screen for the currently selected target.
Menu Brings up a menu that allows you to change the current plotting range, change your
profile, enter setup, display a list of all targets in priority order or view the list of
received weather or safety messages.
Note
: Because the order of targets shown with the
Next
and
Prev
buttons depends on their
priority, pressing
Next
and
Prev
may not always bring you back to the same target if their
priorities have changed. This occurs more frequently when targets or your own vessel are
making course changes.
PACIFIC PEARL
RNG: 4.27nm
SOG: 4.3
CPA: 0.27nm
TCPA: 13:49
