EN
To connect to NMEA 2000
14
NMEA 2000 network connection example
NMEA 2000 port
To connect to NMEA 2000
The Cortex Hub can be connected to an NMEA 2000 network to enable AIS and
Navigation data, including GPS to be sent to other NMEA 2000 devices.
• The NMEA sentences (PGNs) supported are listed on page 26.
• A NMEA 2000 drop cable and T connector are required to connect the Cortex
Hub to a vessel’s NMEA 2000 network.
•
Modifying the Instance or System Identification can be done via the Cortex
Onboard App or from the H1 handset.
Cortex Onboard App:
> Menu ( ) > Settings > Device Settings > Networks
> NMEA 2000...
> Device Instance (0-255) (select to enter value)
> System Instance (0-255) (select to enter value)
Cortex handset:
> Main Menu ( ). Touch on the wrench icon (
) to open the Configuration
Menu.
> Networks
> N2000 (NMEA 2000)
> Device Instance
> System Instance
To change the Device or System instance select the field and use the touchscreen
menu to key a number between 0-255
Chart plotter
Terminating
Resistor
T Connection
Network
extension cable
Network
power
Drop cable
