6.6 FRONT TIRE
Place protectors under points A and B to protect these parts
against bump and scratches, then follow the steps below:
2) REMOVE THE BRAKE CALIPER PLASTIC RETAINER. Unlock the
brake caliper by partially unscrewing (just 2 turns) both M6 Allen
screws in the caliper mount, to allow the easy slide of the
disk while inserting the wheel.
In order to mount the front tire we strongly suggest you to turn your
Pantera upside down, as shown in picture.
1) Take out the nut and the retaining washer from both sides of
the wheel, and keep the spacer in place
Page 15
