6.2 TAKE OUT THE COMPONENTS
Once your Pantera is out of the box, take out all remaining components:
1 x saddle (Including screws)
1 x Box with side reflectors, battery charger, and 2 keys
1 x Box with tools to mount your Pantera (see section no.4 of this manual)
1 x Box with front headlight and headlight brackets
6.3 PLACE THE E-BIKE
The required tool for this operation is a cable cutter.
As mentioned in point 6.1, Pantera should be located on a flat surface with a soft material under the front forks. Once it's done,
it's time to remove all the plastic foam from the bike. Please consider to avoid wasting the boxes and all the foam, because, in
case of return, it will be much easier to pack the bike again and send it back..
Please pay attention when you cut the nylon cable ties as they can be hard to cut. We recommend to use a cable
cutter. The use of scissors or knives is highly risky, as in case of a missed cut the knife could get out of control, causing
damage to you and/or people near you.
Page 12
