Using your Vertu phone
23
Inserting the battery and SIM card
Removing the back cover
Insert the SIM card
Inserting the battery
Replacing the back cover
Charging your Vertu phone
For information on charging your Vertu phone, see "Charging the battery"
(page 55).
Warning: Always switch the phone off and disconnect the
charger before touching the battery.
Keep SIM cards and the Back cover release key out of the reach
of small children.
Important: The SIM card and its contacts are easily damaged. Be
careful when handling, inserting or removing the SIM card.
With the back of your Vertu
phone facing you, position the
Back cover release key (
01
)
into the slot of the locking
screw (
02
).
Turn the key (
01
) a quarter of a
turn anticlockwise, and gently
lift off the back cover as shown.
Warning (Important): Always switch your Vertu phone off before
inserting or removing the SIM card.
With the gold contact area of
the SIM card facing downward,
align the SIM card such that the
bevelled corner (
03
) is located
at the bottom right, and then
insert the SIM card into the SIM
card tray.
01
02
03
Slide the locking mechanism
(
04
) over the SIM card to hold it
in place.
Position the battery so that
the contacts align with the
contacts in the battery
compartment (
05
).
Ensure that the battery and
SIM card are seated correctly
before replacing the back
cover.
To replace the back cover,
locate the internal clip (
06
) first.
Lower the back cover into
position until it clicks into place.
The cover should close tightly
using only light pressure.
04
05
06
Summary of Contents for Ascent RM-589V
Page 1: ...Quick Guide...
Page 2: ......