![Vertu Ascent B User Manual Download Page 82](http://html1.mh-extra.com/html/vertu/ascent-b/ascent-b_user-manual_1008410082.webp)
5 - 3
Data cable
If
not charging
is displayed or charging has failed,
try the following:
>
Disconnect the charger from the AC outlet.
>
Check that the electrical rating of the AC outlet
is compatible with your charger.
>
Verify that the AC outlet has power and that it is
switched on. For example, in many hotel rooms,
AC outlets are used for lighting and may be
switched from remote locations in the room.
>
Wait for at least 10 seconds and then
reconnect the charger to the AC outlet.
>
Use another nearby AC outlet that you know is
providing power.
>
If charging still fails, contact Vertu Concierge for
further advice.
The vibrating alert is disabled while the charger is
connected to your Vertu phone.
When you want to stop charging your battery, for
example when charging is complete:
>
Disconnect the charger from the AC outlet.
>
Disconnect the charger from your Vertu phone
by pulling the charger connector – do not pull
the charger cable.
The charger can be used in conjunction with the
data cable.
DATA CABLE
When used in conjunction with a compatible
computer, the data cable allows you to use the
Vertu Data Suite software supplied on the
CD-ROM to manage your phone and its data. The
data cable also enables you to use your Vertu
phone as a modem to transfer data, or send and
receive faxes. For more information on using your
Vertu phone as a modem contact your service
provider.
You will need to install Vertu Data Suite in order to
use your Vertu phone as a modem.
C
ONNECTING
THE
DATA
CABLE
The data cable is not supplied with your
Vertu phone. It is available for purchase
from all Vertu stores.
>
Connect the end of the
data cable with the
screws attached to the
Serial (COM) port of
your compatible
computer, ensuring it is
seated properly.
>
Tighten the screws.
>
Ensure your
Vertu phone is
switched on.
>
Insert the data cable
connector into the
bottom of your Vertu
phone as shown. (Your
data cable connector
may be slightly different
to the one shown.)
If necessary, with the
data cable inserted, you
can also connect the
charger to your Vertu
phone.
>
Plug the charger
connector into the back
of the data cable
connector as shown.
The headset will not operate if the headset
connector is plugged into the back of the
data cable connector.
Usermanual_en.book Page 3 Wednesday, January 7, 2004 5:55 PM