1 - 2
The battery and SIM card
T H E B A T T E R Y A N D S I M C A R D
If your Vertu phone was purchased at a Vertu store,
the battery and SIM card should have been
installed already. Otherwise, follow the procedure
below to install your SIM card and battery.
The SIM card and its contacts are easily damaged.
Be careful when handling, inserting or removing
the card.
>
With the back of your Vertu phone facing you,
position the back cover release key (
01
) very
carefully into the slot of the locking screw (
02
).
Ensure the key does not slip out of the slot.
>
Turn the locking screw (
02
) a quarter of a turn
anticlockwise, gently pivot (by no more than 45
degrees) and lift off the back cover (
03
) towards
you as shown. If you accidentally remove the back
cover while the phone is switched on, the phone
will automatically switch off.
>
Remove the plastic placeholder (
04
) from your
Vertu phone before inserting the battery.
>
Slide the SIM retainer (
05
) towards the bottom
of your Vertu phone and then pivot outwards.
>
Insert the SIM card into the retainer, ensuring
that the bevelled corner (
06
) is located bottom
left and the gold contact area is facing towards
the gold contact points inside the phone.
>
Return the retainer to its original position and
slide it towards the top of the phone. The
retainer should firmly lock into place.
Caution. Keep SIM cards and the back cover
release key out of the reach of small children.
Always switch the phone off and disconnect
the charger before removing the battery.
Attach the back cover release key to your
keyring for convenience.
02
01
03
Retain the plastic placeholder for future
use. If you need to remove the battery,
insert the plastic placeholder before
replacing the back cover to make it easier to
remove the back cover
For availability and information on using
SIM card services, contact your SIM card
vendor. This may be the service provider,
network operator, or other vendor.
04
05
06
Usermanual_en.book Page 2 Wednesday, January 7, 2004 5:55 PM
