Vertiv NetSure R48-3200, User Manual, Page: 23 / 32

Vertiv
| NetSure Rectifier Module User Manual (UM1R483500e) | Rev. R
23
Table 1:
Exchange of Information between Rectifier and Controller
Commands / signals that can be
received by the Rectifier Module
from the Controller.
Information gathered by the
Controller from the Rectifier Module.
•
Turn On/Off
•
Current Walk-in On/Off
•
HVSD (High Voltage Shutdown)
Reset
•
Current Limit Adjustment
•
Voltage Regulation
•
Input Voltage
•
Output Voltage
•
Output Current
•
Current Limit Setting
•
Temperature
•
Over Voltage Setting
•
On/Off Status
•
Fault Alarms, such as:
HVSD
Fan Fail
•
Protection Alarms, such as:
Input Voltage Protection
Inner DC Bus Voltage Protection
High Temperature Protection
•
Thermal Derating
•
AC Derating
•
AC Fail
•
Imbalance Output Current
•
Address
•
Code
•
Date
•
Software Version
•
Hardware Version
OPERATION
AC Input Protection Device Requirements/Recommendations
Refer to the system documentation supplied with the system the rectifier is installed in.
Local Indicators
Location and Identification: Refer to Figure 15 .
Description: There are three (3) indicators located on the rectifier’s front panel. The functions of these
indicators are as shown in
Table 2 .
NOTE!
DC voltage must be present at the rectifier output terminals (from battery or an operating
rectifier) or AC voltage at the input terminals.